【Overview】

[] RS232/485/422 To CAN Industrial Isolated Converter:  RS232/485/422 To CAN Data Conversion, Supports Modbus RTU Conversion. Multiple Industrial Protections Such As Galvanic Isolation, Lightningproof Protection, And ESD Protection. Suitable For Industrial Control Equipment And/Or Applications With High Communication Requirement. 

【Features】

[] Supports data communication and conversion between RS232/485/422 and CAN interfaces

[] Compliant with CAN 2.0B (extended frame) specification, compatible with CAN 2.0A (standard frame) specification; Compliant with ISO 11898-1/2/3 standard

[] CAN baud rate: 10kbps~1000kbps, configurable

[] Supports 14 sets of configurable filters, can only receive CAN bus data in specific range and type

[] Supports 4 operating modes: transparent conversion, transparent with identifiers conversion, format conversion, and Modbus RTU protocol conversion

[] Up to 1000 frames CAN buffer for buffering transmission data to prevent data loss

[] Onboard unibody power supply isolation, provides stable isolated voltage, needs no extra power supply for the isolated terminal

[] Onboard unibody digital isolation, allows signal isolation, high reliability, strong anti-interference, low power consumption

[] Onboard TVS (Transient Voltage Suppressor), effectively suppress surge voltage and transient spike voltage in the circuit, lightningproof & anti-electrostatic

[] Onboard 15KV ESD isolation protection and 600W lightningproof & anti-surge protection

[] Onboard 120R terminal resistor on the RS485/RS422 port, configurable by jumper

[] Supports device firmware upgrade via RS232/485/422, more convenient for firmware customization

[] Supports setting operation parameters via configuration software or serial commands, capable of saving settings after power off

[] Onboard power supply screw terminal, allows 5V~36V DC wide range input

[] 4 LEDs for indicating the power and transceiver status

[] Industrial grade metal case, supports wall-mount and rail-mount installation, solid and beautiful, easy to install

【Specifications】

[] PRODUCT TYPE Active digital isolated RS232/485/422 to CAN converter

[] POWER SUPPLY INTERFACE

Power supply：5~36V DC

Protection：Anti-reverse

[] DEVICE PORT：RS232/485/422, CAN

[] ISOLATED CAN：

Connector：Screw terminal

Direction control：Hardware automatic control

Resistor：Onboard 120R matching resistor

Baud rate：10kbps~1000kbps

[] ISOLATED RS232：

Connector：DB9 female

Transmission distance：about 15m

Transmission mode：point-to-point

Baud rate：1200bps~460800bps

[] ISOLATED RS485/422：

Connector：Screw terminal

Direction control：Hardware automatic control

Protection：TVS diode, surge protection & ESD protection, power isolation and signal isolation

Resistor：Onboard reserved 120R matching resistor, NC by default, enabled via jumper

Transmission mode：Point-to-multipoints (485 mode: up to 32 nodes, it is recommended to use repeaters for 16 nodes or more； 422 mode: up to 256 nodes, it is recommended to use repeaters for 16 nodes or more)

Baud rate：1200bps~460800bps

[] INDICATORS：

PWR：Red power indicator, lights up when voltage is detected

RUN：System operating indicator, turns off if CAN bus is abnormal

COM：RS232/485/422 RX indicator, lights up when RS232 or 485 or 422 port receives data

CAN：CAN RX indicator, lights up when CAN port receives data

[] OPERATING ENVIRONMENT：Temperature range -15 ~ 70℃

【Interface Introduction】

【Pin Definition】

【Dimensions】

[] RS232-485-422-TO-CAN

1. RS232/485/422-TO-CAN x1

2. Rail-mount buckle x1

3. Screwdriver x1

To：

Dear Customers, There may be a lag of several hours before we could process your order, depending on the time difference between your location and ours. Sincerely hoping your understanding!

Email(support)

services01@spotpear.com