【Overview】

[] Features of the new version 3.1 V3.0

[] About EMC (Electro Magnetic Compatibility) problem, We solved this problem on X850 V3.1 by placing the MSATA under the PCB board.

[] When using the X850 as a bootable hard disk, the problem of 'reboot' command is solved；

[] The X850 board can be mounted under the raspberry pi, retaining the use of GPIO;

[] Same size as the Raspberry Pi motherboard

[] Replaced the power supply mode (using the Micro usb power supply instead of the GPIO power supply, additional power may be required only when using a large capacity hard disk)

[] All use patch processing technology, product quality is more reliable;

【Features】

[] Supports upto 1TB mSATA solid-state drive (SSD)

[] Ideal storage solution for Raspberry Pi

[] USB 3.1 Gen1（ Support USB 3.0） to SATA 6Gb/s Bridge Controller

[] USB 2.0 connectivity offers plug-and-play functionality on your Raspberry Pi

[] Quick file transfer with high-speed USB 3.0 connectivity from a PC or a Mac

[] Bus powered, No additional AC adapter required

[] Ultra compact size

【Specification】

[] Power supply: USB connection with raspberry pi.

[] Output Ports: 1 x USB

【Support mSATA SSD storage】

【Interface introduction】

[] X850 Expansion Board x1

[] USB 3.0 cable x1

[] Install Screws pack x1

[] USB Adapter x1

To：

Dear Customers, There may be a lag of several hours before we could process your order, depending on the time difference between your location and ours. Sincerely hoping your understanding!

Email(support)

services01@spotpear.com