Note

The Barcode Scanner Module (C) and the Barcode Scanner Module use the same scheme and the setup codes and commands are compatible, so they share the same user manual.

Document

Barcode Scanner Quick Start
User Manual/Setting Manual

Software

SSCOM Serial Assistant

FAQ

Question:When using command trigger mode, can I disable the answer message of the trigger command?

Answer:

You can replace the trigger instruction with 0x16 0x54 0x0D

To：

Dear Customers, There may be a lag of several hours before we could process your order, depending on the time difference between your location and ours. Sincerely hoping your understanding!

Email(support)

services01@spotpear.com

TAG： Intel 12th RS485 to Ethernet Raspberry Pi 5 User Guide Luckfox Pico Raspberry Pi DSI 800×480 3key Keyboard Raspberry Pi 5 Arduino Thermal imaging spotpear PI5 Case Modbus RTU ESP32-S3 QMI8658A raw display ESP32 LuckFox Pico User Guide Arducam Pi5 Heatsink Raspberry Pi 5 Terminal Raspberry Pi Secondary Screen Luckfox Pico Max

Barcode Scanner Module (C) User Guide

Note

Document

Software

FAQ

Question:When using command trigger mode, can I disable the answer message of the trigger command?

To：

Email(support)

Barcode QR 2D Codes Scanner Module Supports High density Barcode Scanning Module