• sales

    +86-0755-88291180

RP2040 board compatible for Raspberry Pi Pico updated with 0.96inch LCD Display Module

$16.89

Brand:Spotpear
SKU:0101504
Date:2021-10-13 17:36
No:
In Stock





RP2040 board compatible for Raspberry Pi Pico updated with 0.96inch LCD Display Module

RP2040-LCD-0.96 For Pico

Based on the Raspberry Pi official independent research and development RP2040

Compatible with most Raspberry Pi Pico modules 

 
Features At A Glance

RP2040-LCD-0.96 is a low-cost and high-performance microcontroller development board designed based on the Raspberry Pi RP2040, with a flexible digital interface. Like Raspberry Pi Pico, the hardware uses Raspberry Pi's official self-developed RP2040 microcontroller chip, and the software can choose the C/C++ SDK provided by the Raspberry Pi, or use MicroPython for development, which is convenient for quick start development and embedding Apply to the product. Not only that, it also has a 0.96-inch IPS display, a lithium battery charge and discharge interface, and a high-efficiency DC-DC buck-boost chip. 

  • Using Raspberry Pi's official self-designed RP2040 microcontroller chip
  • Equipped with dual-core ARM Cortex M0 + processor, running frequency up to 133MHz flexible clock
  • Built-in 264KB of SRAM and 2MB of on-chip Flash
  • Adopt Type-C interface, keep up with the trend of the times, no need to entangle the positive and negative plug
  • Onboard 0.96 inch 160×80 pixel 65K color IPS LCD display
  • The onboard lithium battery charge and discharge interface is conducive to the use of this product in some mobile scenarios
  • Onboard DC-DC chip TPS63000, 1.8A current switching high-efficiency DC-DC buck-boost chip
  • Stamp hole design, which can be directly welded and integrated into the bottom plate designed by the user
  • USB1.1 host and device support
  • Support low-power sleep and hibernation modes
  • Can be identified as mass storage via USB for drag-and-drop download of programs
  • Up to 26 multi-function GPIO pins
  • 2 SPI, 2 I2C, 2 UART, 3 12-bit ADC, 16 controllable PWM channels
  • Accurate on-chip clock and timer
  • Temperature Sensor
  • On-chip accelerated floating point library
  • 8 programmable I/O (PIO) state machines for custom peripheral support 
Version selection 


Support C/C++, MicroPython

Complete SDK, open source materials and tutorials, easy to use, can be quickly embedded in the application 

Dual-core processor

Onboard dual-core ARM Cortex M0 + processor
Operating frequency up to 133 MHz

26 multi-function GPIO pins

Support configuration pin function, convenient and flexible development and integration

Resource introduction 


  • USB Type-C interface 
  • BOOT button
  • ---Press when reset to enter download mode
  • RESET Reset button
  • 0.96 inch IPS LCD display
  • ---Resolution 160 × 80, 65K color 
  • Battery interface
  • ---MX1.25 connector, can be used to connect 3.7V lithium battery, support charging and discharging
  • TPS63000
  • ---High efficiency DC-DC buck-boost chip 
  • ETA6096
  • ---High-efficiency lithium battery charging chip
  • RP2040
  • ---Dual-core processor, up to 133MHz operating frequency
  • W25Q16JVUXIQ
  • ---2MB NOR-Flash 
  • DEBUG interface
  • Pin interface
  • ---Compatible with Raspberry Pi Pico standard interface