• sales

    +86-0755-88291180

Raspberry Pi 7inch HDMI LCD (H) User Guide

Introduction

1024×600, 7 inch Capacitive Touch Screen LCD, HDMI interface, supports various systems。 Toughened glashh capacitive touch panel, 6H hardness

7inch IPS screen, 1024x600 hardware resolution, configurable by software (up to 1920x1080)Features

  • Toughened glass capacitive touch panel, 6H hardness
  • Supports popular mini PC such as Raspberry Pi, BB Black, Banana Pi
  • Used with Raspberry Pi, supports Raspbian, Ubuntu, WIN 10 IOT, single touch and driver free
  • Multi languages OSD menu, for power management, brightness/contrast adjustment, etc
  • 3.5mm audio jack, supports HDMI audio output
  • Supports VGA input 
  • High quality PC case, optional tilt angle: 30°/50°

Working with PC

This product supports Windows 10/8.1/8/7 OS.:
1. Connect the TOUCH interface of LCD to the USB interface of PC . Waiting for a moment, The touch will be recognized by Windows automatically
2. If you use HDMI, you need to connect the HDMI interface of LCD to the HDMI port of PC. About 5s later, you can see that the LCD display properly. If you need the audio, if you insert a 3.5mm earphones to HP ports.
3. Use VGA,you need to connect the VGA interface of LCD to PC's VGA ports by Mini HDMI to VGA Cable
Note:
1) If multi screen are connected to one PC at the same time, you can only control the cursor by this LCD, so please set the LCD as main screen.
2) Some of PC cannot support HDMI screen Hot Plug . In this case, restart the PC can solve.
3) Sometimes LCD will flicker because of undersupply from USB cable of PC. You need to connect an external power supply (5V/2A) to DC port.
4) HP audio output only works while using HDMI communication
5) Mini HDMI to VGA Cable is necessary and need to be purchased separately if you use VGA communication.

Touch Settings on Win 10 PC

Some users want to connect more than one display to their PC. Here we talk about how to setting the touch to make the touchscreen to control its screen separately.

  • Connect touchscreen to PC. Here we use an standard PC monitor and connect an 7inch HDMI LCD (C) for example. We make the monitor as main screen and the touchscreen as secondary screen.
  • By default,The touchscreen can only control cursor on the main screen. Here we set it to control the secondary screen
  • Open Control Panel and search Tablet PC setting on the control panel and open the tool


  • Click button "Setup..." to setting the touchscreen


  • After click the setup you can find that there is prompt on your first screen with white color background and other screens are white.


  • If we want the touch of the touchscreen to control the desktop of the touchscreen itself. Just press Enter key to pass the first screen. And the second screen, when you find that the black text is displayed on the touchscreen, just touch the center of the touchscreen to finish this setting.
  • After this setting, the touch on the screen will just control this touchscreen even thought it is not the main screen.

Note:

1 If the first screen and the second screen are touchscreen as well, you can touch them when the text is displayed on the screens. Then you can find that all the touchscreen can work.

2 This method is just tested on win 10 PC.

Working with Raspberry Pi

Supports Raspbian/Ubuntu mate/Windows 10 iot Core

When working with Raspberry Pi, you should set the resolution of the LCD by yourself, or else the LCD screen will not work. For more detail information, please read the following section.

Download the Raspbian image from Raspberry Pi web site. Write the image to a TF card and append the following lines to the config.txt file which is located in the root of your TF card:

max_usb_current=1
hdmi_force_hotplug=1 
config_hdmi_boost=10
hdmi_group=2 
hdmi_mode=87 
hdmi_cvt 1024 600 60 6 0 0 0

If you use the LCD with Raspberry Pi 4B, you need to remove line dtoverlay=vc4-fkms-V3D from config.txt file

You must make sure that there are no spaces on either side of the equal sign.

Connect the Touch interface of LCD to USB port of Raspberry Pi

Connect HDMI interface of LCD to HDMI port of Raspberry Pi

Save and connect the TF card to your Pi then power up.


Note:

  • Resolution of Ubuntu Mate OS or Windows 10 IoT Core OS can also be set properly by editing config.txt.
  • For Pi Zero / Zero W: if you've used an SD card on a Pi 3 and then attached the card to the Pi Zero, the touch screen often doesn't work. In such cases, you have to write a fresh system image to the SD card. The first boot up must be done on the Pi Zero but not Pi 3, due to initialization for a corresponding device.

Rotation

Note: To rotate the touch, you can re-compile the kernel as well. There is an example for reference (use 7inch HDMI LCD (C).)

Display Rotating

To rotating the display, you can append this statement to the config file

display_rotate=1 #1: 90; 2: 180; 3: 270

Reboot the Raspberry Pi

sudo reboot

Touch rotating

With the operation above. The screen could rotate in display. However, the touch works improperly. To rotate the touch as display, you could do as below:

1. install libinput

sudo apt-get install xserver-xorg-input-libinput

2. create an xorg.conf.d folder

sudo mkdir /etc/X11/xorg.conf.d

3. copy file 40-libinput-conf to the folder which we created

sudo cp /usr/share/X11/xorg.conf.d/40-libinput.conf /etc/X11/xorg.conf.d/

4. Append a statement to touchscreen part of the file as below:

sudo nano /etc/X11/xorg.conf.d/40-libinput.conf


5. save and reboot your Pi

sudo reboot

After completing these steps. The LCD could rotate 90 degree both display and touch.

Note:

90 degree: Option "CalibrationMatrix" "0 1 0 -1 0 1 0 0 1"

180 degree: Option "CalibrationMatrix" "-1 0 1 0 -1 1 0 0 1"

270 degree: Option "CalibrationMatrix" "0 -1 1 1 0 0 0 0 1"


Working with Jetson Nano

To work with Jetson Nano Developer Kit, you just need to connect the LCD and power on

  • Connect the Touch interface of the LCD to USB port of Jetson Nano
  • Connect the HDMI interface of the LCD to HDMI port of Jetson Nano
  • Power on the Jetson Nano and the LCD can display after several seconds.

Working with BeagleBone

How to program Angstrom image file

If this LCD module is used for display only, you can program the latest Angstrom image file to the board directly without any change. The BeagleBone will read the display parameters of the 7 inch HDMI displayer and set the resolution to 1024*600 automatically. When using this LCD module as a touch screen, you should program the image file 7inch HDMI LCD (H) Angstrom Image. The password is re3y. Please follow the steps below to program the image file.

  1. Download the zip file to your PC, unzip it and get an .img file.
  2. Connect a TF card to your PC, and format your TF card with the SDFormatter.exe
    Notices: The capability of TF card in used here should be more than 4GB. In this operation, a TF card reader is also required, which has to be purchased separately.
  3. Start the Win32DiskImager.exe, and select the system image file copied into your PC, then, click the button Write to program the system image file.
  4. After programming the image file, please insert the TF card to your board, press the key uBOOT and hold it till power up. Then, you will enter the system located at the TF card. Wait a moment and you will enter the graphical desktop directly.

Hardware connection

  1. Connect the LCD to the HDMI on the BeagleBone board with a HDMI to micro HDMI cable (sold separately);
  2. Connect the USB Touch interface on the LCD to the USB interface on the BeagleBone board with a type-A-to-micro USB cable. (BeagleBone has two USB interfaces, one for host and the other for client. In here, you should connect the LCD module to the USB host interface).

How to use with Banana Pi

Before powering up the Banana Pi, you should connect it to a LCD displayer properly, since the Banana Pi may read the resolution parameters of the LCD displayer on startup. And the connection should be remained till the Banana Pi enters the desktop. In this case, even if you disconnect the LCD displayer and reconnect it again to the Banana Pi, the LCD can still work properly.

How to program Raspbian_For_BananaPi image file

Program the image file 7inch HDMI LCD (H) Raspbian Image with password 4ph9 to the board. This image file supports the modules BananaPi Pro and BananaPi.

  1. Download the zip file to your PC, unzip it and get an .img file.
  2. Connect a TF card to your PC, and format your TF card with the SDFormatter.exe
    Notices: The capability of TF card in used here should be more than 4GB. In this operation, a TF card reader is also required, which has to be purchased separately.
  3. Start the Win32DiskImager.exe, and select the system image file copied into your PC, then, click the button Write to program the system image file.

Hardware connection

  1. Connect the LCD to the HDMI on the Banana Pi board with a HDMI cable;
  2. Connect the USB Touch interface on the LCD to the USB interface on the Banana Pi board with a type-A-to-micro USB cable.

How to load WiFi driver of BananaPi Pro

Comparing with the Banana Pi, the BananaPi Pro has added an on-board WiFi module. When using the BananaPi Pro, you can use SSH to connect to the Pi and execute the following command to load the WiFi driver:

sudo modprobe ap6210

How to use with the Lubuntu system

Program the image file 7inch HDMI LCD (H)Lubuntu Image with password u00b to the board. This image file supports the modules BananaPi Pro and BananaPi. User name: bananapi Password: bananapi

Keys Introduction

Note: This introduction is based on the 7inch HDMI LCD (H) (with case)


  • Power: Open or Close LCD display
  • Menu: Open OSD menu (It can also work as OK after entering the menu )
  • Up/Left: Direction button
  • Down/Right: Direction button
  • Exit: it can also work as Return after entering the menu

You can use "Power" button to close LCD display for reducing consumption if it will be idle for a long time.

Open OSD menu by press button Menu, then use "OK button" and "Direction button" to change the configuration.Then use "Return button" to exit.