Features

• Onboard RV64GC ISA Quad-core 64-bit SoC, operating frequency up to 1.5GHz
• Supports OpenCL 3.0, OpenGL ES 3.2 and Vulkan 1.2
• Available in 8GB LPDDR4 RAM, optional wireless module
• Multiple onboard interfaces, including M.2 / CSI / DSI / HDMI / eMMC / USB 3.0 / 40PIN GPIO / RJ45 Gigabit Ethernet port / TF card slot, etc
• Supports 4K@60fps and H264/H265 multi-stream video decoding, 1080p@30fps and H265 multi-stream video encoding
• Onboard 40PIN GPIO header, compatible with Raspberry Pi series boards
• Provides wide software compatibility including support for Debian

   Specifications

• PROCESSOR : StarFive JH7110
• CPU : 
• RISC-V U74 Quad-core 64-bit RV64GC ISA SoC
• With 2MB L2 cache and S7 core, operating frequency up to 1.5GHz
• GPU : IMG BXE-4-32 MC1, operating frequency up to 600MHz
• MEMORY : Optional 4G/8G Byte LPDDR4
• STORAGE : TF card (Not included)
• CAMERA : MIPI CSI 2lane 1080p@30fps
• DISPLAY : 
• 1 × 2-lane MIPI DSI 1080p@30fps
• 1 × 4-lane MIPI DSI 2K@30fps
• (Only one DSI port can be used for display at the same time)
• 1 × HDMI 2.0 4K@30fps, 2K@60fps
• USB HOST : 4 × USB 3.0 Type-A port
• USB DEVICE : 1 × USB Device (multiplexed with the USB Type-C port)
• NETWORKING : 
• 1 × Gigabit Ethernet port (main Ethernet port)
• 1 × 100/10M Ethernet port
• RESET BUTTON : 
• Press the reset button to reboot when in the U-boot mode;
• Press and hold the reset button for three seconds to reboot after the system boots
• BOOT MODE SWITCH : 
• RGPIO_1 : 0        RGPIO_0 : 0        Boot Mode : flash
• RGPIO_1 : 0        RGPIO_0 : 1        Boot Mode : TF Card
• RGPIO_1 : 1        RGPIO_0 : 0        Boot Mode : eMMC
• RGPIO_1 : 1        RGPIO_0 : 1        Boot Mode : UART
• DEBUG PIN HEADERS : Multiplex pin 8 and pin 10 (physical address) on the 40PIN header, for UART TX and UART RX functions
• USB TYPE-C POWER PORT : 
• Supports Quick Charge input 5V DC (minimum 3A) (up to 30 W)
• Supports 5~20V fixed voltage input
• Supports USB Type-C PD 2.0, 9V/2A, 12V/2A, 15V/2A, 20V/2A
• Supports QC 3.0/2.0 adapter, 9V/2A, 12V/1.5A
• OTHER POWER SUPPLY : 
• 5V input via 40PIN GPIO header
• PoE port power input, requires external PoE module
• OTHER INTERFACES : 
• 40PIN GPIO
• M.2 M-Key Solid State Drive socket
• eMMC socket
• 2PIN Fan header
• 3.5mm Audio Jack, 4-pole stereo audio jack
• DIMENSIONS : 100 × 74 × 21mm
• COMPLIANCE : RoHS, FCC, CE
• RECOMMENDED OPERATING AMBIENT TEMPERATURE : 0~50℃ (If the operating temperature of the chip exceeds 85°C, the frequency and voltage of the CPU will be automatically reduced for cooling)

Powerful Performance, Open Source Application Environment, And Rich Software Ecology

More Possibilities For VisonFive 2

* All GPIO pins can be multiplexed to support different functions including

SDIO, Audio, DMIC, SPI, I2C, UART, PWM, CAN

• 1. JH7110
• 2. PoE port
• 3. Boot mode selection
• 4. 40Pin GPIO
• 5. 4GB/8GB LPDDR4 SDRAM
• 6. Reboot button
• 7. EEPROM
• 8. Type-C power port
• 9. 2-lane MIPI CSI
• 10. PMIC
• 11. 2PIN FAN header
• 12. Gigabit Ethernet Chip
• 13. Gigabit Ethernet port (main Ethernet port)
• 14. 100/10M Ethernet port
• 15. HDMI 2.0 port
• 16. 3.5mm Audio Jack
• 17. USB 3.0 Ports
• 18. 4-lane MIPI DSI
• 19. USB 3.0 Host chip
• 20. 2-lane MIPI DSI
• 21. eMMC socket
• 22. TF card slot
• 23. QSPI Flash
• 24. M.2 M-Key

Product Show

   Video

1. Packing and protective case x1
2.  VisionFive2 ×1
3. OPTIONS WiFi module x1
4. Screws pack ×1