• sales

    +86-0755-88291180

Raspberry Pi PoE board Power over Ethernet for 3 Model B+ 4 Model B

$28.89

Brand:Spotpear
SKU:0102071
Date:2020-12-12 15:50
Part Number:
No:
In Stock




X765 Power over Ethernet (PoE) expansion board can make your project wiring a breeze - and best of all they work to connect any 802.3at/802.3af-capable router to your Raspberry Pi 3 model B+ and 4 model B.

Overview

X765 Power over Ethernet (PoE) expansion board can make your project wiring a breeze - and best of all they work to connect any 802.3at/802.3af-capable router to your Raspberry Pi 3 model B+ and 4 model B. You can now power your Raspberry Pi and other devices in any location with just a single cable. Perfect for removing the clutter of wires and for reliable use in remote locations.

This is an economical, practical, high-performance, and reliable Isolated 5V 5000mA PoE+ expansion board with a variety of power output connectors based on IEEE 802.3at standard. It can divide power from a network cable, and can be used with any PoE/POE+ injector that is compatible with IEEE 802.3at /802.3af, and supply power for Raspberry Pi and other non-PoE network equipment.

Simply attach the standoffs in the four fixed holes of the expansion board, then connect to the Raspberry Pi's pin header using the specially-made daughter board. Once the board is connected, you can power your Pi through the RJ-45 network connector.

The X765 board is directly connected on top of the Raspberry Pi using the board GPIO header pins, and no wiring nor soldering is required, and duplicated the 40-pin header of the R-Pi in order to support existing expansion boards. X765 is fully compatible with Raspberry Pi 3B+ and Pi 4 B.

Features

FOR USE WITHRaspberry Pi 3 Model B+ / 4 Model B
OPERATING SYSTEMAll Raspberry Pi operating systems
KEY FEATURES
  • IEEE802.3 AT Standard (backward compliant with 802.3af)
  • Power Output: 5Vdc Max 5A
  • Fully isolated switched-mode power supply
  • Uses Texas Instruments' high-power, high-efficiency PoE interface PD and PWM controller
  • Integrated Short Circuit Protection and Output Over Voltage Protection
  • Supplies total 5 Amps regulated DC power and output via 3 XH2.54 connectors and 40-pin header
  • Powers the Raspberry Pi via the 40-pin header - no additional cabling required
  • Reserved 40-pin stackable Header for Add-On Boards
  • Fully compatible with X820X850X860X870X822X852X825X828X855X856X857
  • Mounting holes and standoffs provide mechanical stability of the RPi and X765 assembly
Technical Specification
  • Power input: 38~57Vdc
  • Output voltage: 5Vdc +/-5%
  • Output current: 4.8~5.5A (IEEE 802.3at), 2.5A (IEEE 802.3af)
  • Efficiency: ≥ 80%
  • Isolation: 1500V
NOTES- Don't not apply power to Raspberry Pi the Pi's Micro USB or Type-C power socket.

Photos