Raspberry Pi Motor Driver HAT, I2C Interface

$12.89

Brand：Spotpear

SKU：0102021

Date：2020-08-03 16:06

Part Number：

Motor-Driver-HAT

No：

- +

In Stock

Buy It Now

Add to cart

Ask a Question

Copy Link

The Motor Driver HAT is designed for Raspberry Pi, controlled via I2C interface, will drive two DC motors at the same time. It's an ideal choice for you to DIY mobile robots.

Features

Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards
I2C controlled, by setting 5 address jumpers, it is stackable up to 32 this modules
Onboard PCA9685 chip, provides 12-bit hardware PWM to adjust motor speed
Onboard TB6612FNG dual H-bridge motor driver, high efficiency, low heating
Integrates 5V regulator, up to 3A output current, can be powered from battery through VIN terminal
Reserved I2C control pins, allows to work with other control boards
Comes with development resources and manual (examples in BCM2835, wiringPi, and python)

Specifications

Power supply: 6V~12V (VIN terminal)
Logic voltage: 3.3V
PWM driver: PCA9685
Control interface: I2C
Motor driver: TB6612FNG
Dimension: 65mm x 30mm
Mounting hole size: 3.0mm

Dimensions

Note: Raspberry Pi in the photos is NOT included.

Motor Driver HAT x1
RPi screws pack (2pcs) x1

TAG： SPI Communication Raspberry Pi 5 Case Raspberry Pi Secondary Screen ESP32 SC3336-3MP-Camera-B PI5 Raspberry Pi 5 Active Cooler Black Raspberry Pi ZERO Milk-V Duo S 512MB SG2000 RISC-V Raspberry Pi 5 9layer Case Allwinner Raspberry Pi 5 Aluminum Case Raspberry Pi 5 SpotPear Jetson Nano Raspberry Pi display Jetson Nano Cooler Raspberry Pi 4B PoE Raspber Pi 5 5V5A Power Programmable Keyboard

Forum：

1、Raspberry Pi 7.9inch DSI Volumio

2、Step 4 in Arduino setup configuration tutorial

3、Aztec Setup QR code

4、Milk-V Duo 256M do not boot Milk-V Duo 256M NEW SDK img

5、My wavehouse HAT has no triangle mark on Raspberry Pi 5 PCIe to M.2 NVMe SSD