I downloaded Pre-installed image.
I screwed the board to the display.
I connected everything according to the instructions from here:
but the display still doesn't work.
kmsprint and xrandr attached
- sales/support
Google Chat: zj734465502@gmail.com
- sales
+86-0755-88291180
- sales01
sales01@spotpear.com
- sales02
dragon_manager@163.com
- support
services01@spotpear.com
- CEO-Complaints
manager01@spotpear.com
- sales/support
WhatsApp:13246739196
Raspberry Pi 10.1inch dsi display not work with pi5
2024-04-07 11:50:16 Ask
7answers
SpotPearGuestf9576
- Answer time:
】Check your system version with "uname -a", and if it's the 6.6.20 kernel, run
sudo rpi-update pulls/6050to perform the fix.
Remember to back up any important data before updating to prevent loss in case of any issues.
Add the following code to config.txt
dtoverlay=vc4-kms-dsi-waveshare-panel,10_1_inch】Try this our pre-configured image
https://drive.google.com/file/d/17dR27YgMWdooZstDSJWwnHL3j9TukPpU/view?usp=drive_link
Add the following code to config.txt
dtoverlay=vc4-kms-dsi-waveshare-panel,10_1_inch】 Reference from this link
https://github.com/raspberrypi/linux/pull/6050
Like0
report
SpotPearGuest49792
- Answer time:
https://drive.google.com/file/d/17o3XsEUdJn1xNYPBTWarNBOyZ1BP-jGi/view?usp=sharing
try this image ， just write it ， No need other configured code The LCD will display on PI5
Like0
report
SpotPearGuest7a0b1
- Answer time:
still can not work
I connect LCD like this
Like0
report
SpotPearUser4
- Answer time:
The image and configuration I sent by default use I2C0.
This is erro
Like0
report
SpotPearUser4
- Answer time:
You need set switch like this
Power off, change the dip switch back to the I2C0 position, then restart, and it should be fine.
Like0
report
SpotPearGuest7a0b1
- Answer time:
It's working)))
How now i can to enter password?
Where screen keyboard?
Like0
report
SpotPearUser4
- Answer time:
pi
raspberryYou need use a extra keyboard to USB
Like0
report
Price:
$89
Part Number：
10.1inch-DSI-LCD-(C)
Brand:
Spotpear